Blog Detail

Electronics Design Infomation

Electronics Design Infomation

http://electronicsdesigninfo.blogspot.com

This site contains a lot of Free E-Books and all information about Electronics Engineering, EBooks, Algorithms, Software Books & Complete Micro Processor Guide

subscribe Recent Posts

  • How to manufacture the CMOS inverter?

    Posted on Tuesday September 16th, 2008 at 22:10 in interview questions

    by connecting a pmos transistor and cmos transistor in series and take the output from middle of the connection...

  • sequential circuit 3

    Posted on Tuesday August 5th, 2008 at 05:40 in sequential circuits

    Calculate the timing parameters (tS, tH, tCD, tPD, tCLK) for this system as a whole....

  • sequential circuit 1

    Posted on Tuesday August 5th, 2008 at 05:39 in sequential circuits

    What is the smallest clock period for which the circuit still operates correctly? By removing the pair of inverters and connecting the Q output of the left register directly to the D input of the right register, if the clock period could be adjusted...

  • sequential circuit 2

    Posted on Tuesday August 5th, 2008 at 05:39 in sequential circuits

    Calculate timing parameters for the system as a whole taking into account d1 and d2. Don't make any assumption about the relative sizes of the two delays....

  • sequential circuit 4

    Posted on Tuesday August 5th, 2008 at 05:38 in sequential circuits

    What is the smallest value for the ROM's contamination delay that ensures the necessary timing specifications are met? Assume that the ROM's tCD = 3ns. What is the smallest clock period that ensures that the necessary timing specifications are met. ...

  • sequential circuit ii

    Posted on Tuesday August 5th, 2008 at 05:37 in sequential circuits

    Assuming that the clock period is 25ns, what is the maximum setup time for the registers for which this circuit will operate correctly? Assuming that the clock period is 25ns, what is the maximum hold time for the registers for which this circuit wi...

Comments & Reviews

There is no rating for this blog because there are no comments yet.

Post A Comment/Review

* Your IP is being logged.
* Your e-mail address is used only for verification purposes only and will not be sold, or shown publicly.
* No HTML tags allowed
* DO NOT use the Comments/Reviews to promote your own site.

Name: or Login
E-mail:
Rating:
Verify: Spam Protection: sum of 1 + 4
Comment:
  Remember Information