Device firms, establishments or facilities that are involved in the production and distribution of medical devices intended for use in the U.S are required to register annually. Most establishments that are required to register with the FDA are also required to list the devices that are made there and the activities that are performed on those devices. Initially, FDA issued a 28-page Proposed Rule that would amend its regulations regarding medical device establishment registration and device listing (the Proposed Rule). The Proposed Rule contains four types of proposed changes to FDA’s device establishment registration and device listing regulations. For example, Proposed Rule would amend FDA’s current regulations to make them consistent with provisions of the 2007 FDAAA pertaining to electronic device establishment registration and listing, many of which FDA has already implemented. Second, the Proposed Rule would require establishments to provide certain information that FDA currently requests when the establishment registers or lists a device, but is not mandatory. Proposed Rule would also amend the regulations to facilitate FDA’s collection of information from foreign establishments regarding their devices that are imported into the U.S. as required by the 2002 Bioterrorism Act and other proposed changes to be addressed. Final Rule requires establishments to provide additional or different information than specified in the current regulations, but which FDA now requests via FURLS. This Webinar will provide latest update as well as a “refresh” overview on how to register your device company and list your device(s) correctly and meeting requirements and expectation regardless of the outcome of the Final Rule.
Areas covered in the session:
• When and how to register and list
• Review the four major changes to FDA’s device establishment registration and device listing regulations
• Proposed changes to Implement the provision of Bioterrorism Act applicable to imported devices
• Other proposed Amendments that would change current device establishment registration and listing requirements
• Replacement of the current regulations regarding updating device listing information outside the required update periods
• Clarification of who must provide establishments’ registration numbers
Who will benefit:
This webinar will provide valuable assistance and guidance to medical device firms, importers and those who need to register their device firms and list their device(s). The employees who will benefit include: All levels of management and departmental representatives and those who desire a better understanding or a "refresh" overview of the establishment registration and listing process from start to finish, including:
• Regulatory Affairs
• Quality and Compliance
• Marketing & Sales
• Distributors/Authorized Representatives
• Legal Counsel
• Engineering/Technical Services/Operations
David R. Dills, Global Regulatory Affairs & Compliance Consultant currently provides regulatory affairs, compliance and quality consultative services for early-stage and established Class I/II/III device, In Vitro Diagnostics, cosmetics and bio/pharmaceutical manufacturers on the global landscape, and also has an accomplished record with more than 25 years of experience in the areas of Regulatory Affairs, Compliance and Quality Systems. He has been previously employed, with increasing responsibilities by medical device manufacturers and consultancies, including a globally recognized CRO and has worked directly with manufacturers engaged in compliance remediation activities and services involving consent decrees, CIA’s, warning letters, 483 observations, and customer generated compliance events, and prepares for and conducts QS and regulatory audits.
He has been directly involved with constructing, reviewing, and/ or remediating regulatory submissions, including 510(k), PMA, IDE applications, IND, BLA and NDA submissions, preparing Supplements, Amendments, U.S. Agent, works closely with the key stakeholders and Agency/Center Reviewers regarding submission meetings and negotiations; clinical affairs and study submissions; and provides regulatory submissions and post-market project leadership and guidance covering different therapeutic and medical specialties based on classification.
Mr. Dills has a strong background in the interpretation and applicability of FDA regulations, including 21 CFR 210/211, 820 QSR/cGMP, Quality System implementation and compliance requirements, GxP training, leads and directs activities for the registration and approval process and working with Agencies in Asia Pacific, EU and The Americas, including but not limited to FDA, European Medicines Agency–EMA, MHRH, ANVISA, PMDA, MOH, SFDA, TGA, and Health Canada; and defining and executing regulatory compliance, risk mitigation and remediation strategies in response to inspection findings. Additional activities include Pre-FDA Facility Inspections, Mock Audits/Due diligence and assessing state of readiness for Pre-approval inspection (PAI/PMA), proof of management oversight, facilitate and direct efforts for remediation planning and monitoring, and assessment of the critical sub-systems, records and document controls; and strives for reduction of regulatory compliance risk for companies.
Directs and leads efforts for PM support and consultative services on behalf of manufacturers and subcontracted by third-party consultancies and provides services involving all phases of the product development, submission, and commercialization process from premarketing to postmarketing; retained as U.S. Agent for international pharma and device clients; conducting supplier and QS audits/assessments; establishment registration and listing; Agency inspection readiness preparation and remediation; preparing Agency responses due to enforcement actions; conducting GxP audits and preparing CAP/remediation plans; compliance engineering support; support and/or lead efforts regarding Adverse Event, MDR, Incident Reporting, Postmarketing Surveillance and Vigilance Reporting; clinical affairs, establish and/or remediate Quality Management and documentation systems for GxP compliance; preparation for ISO 13485 registration and CE Mark; and multi-country product registrations and licensing.
Mr. Dills manages quality, regulatory and compliance projects with multiple competing priorities having a direct impact on site operations/commercial opportunities. Develops strategies for governmental approval to introduce new products to market, provides guidance and clarity on regulatory requirements, prepares and/or reviews submissions [e.g., NDA, ANDA, 510(k), PMA, IDE and BLA], including design dossiers and technical files, and other applications for Asia Pacific, The Americas and EU. Directs and leads efforts in establishing and retooling QA systems with emphasis on preventing the design, manufacture, and shipment of defective product; provide compliance engineering support; and lead efforts for GxP Strategic Compliance.
Mr. Dills manages regulatory problems (e.g. AE’s, MDRs, Agency enforcement, and complaints) related to development, manufacturing, and commercialization, and recommends action to senior leadership to ensure effective resolution for manufacturers to achieve sustainable and proven compliant systems. Background encompasses broad capabilities in quality systems; documentation development and remediation; RA/RC oversight and governance; design controls; CAPA/investigations; GxP training; software and process validation with compliance oversight; supplier management; interfaces with FDA and other Agencies on the regulatory landscape; compliance with MDD/IVDD Directives and Technical File/Design Dossier and CE Mark requirements; and demonstrates credible experience to optimize business performance through proactive strategies to mitigate compliance exposure.
He also develops strategies and adds business value to manufacturers by providing strategic and tactical solutions that facilitate the achievement of regulatory and quality milestones and on minimizing delays due to noncompliance. He conducts Compliance Governance Assessments and Agency Mock Inspections; provides assistance during inspections and with post-inspection correspondence and meetings, involved in the product life cycle and commercialization process and works effectively across all functions for overall corporate compliance to support a company’s goals and strategies.
Mr. Dills analyzes the benefits/risks for informed decision-making; interprets the regulatory precedents and new legislation; understands the competitive landscape; develops the business and regulatory approach; conducts persuasive communication with regulatory authorities; executes an effective path to approval; assists with GxP compliance strategies, effectively coordinates development in multiple markets; selects appropriate testing and manufacturing suppliers; and strives for overall corporate compliance with regulations in The Americas, EU, and Asia Pacific.
He provides direction on understanding the regulatory landscape for the product and provides a fully integrated approach to device development including design controls, and effective communications with Regulatory Authorities related to product development and post-marketing activities.
Mr. Dills has served on the Faculty Advisory Board for the Pharmaceutical Training Institute, Editorial Advisory Boards for Software Quality Professional and the Institute of Validation Technology (IVT), publisher of the Journal of GXP Compliance and Journal of Validation Technology and on the Readers’ Board for Medical Device & Diagnostic Industry and Medical Product Manufacturing News and was nominated and accepted for inclusion into the 2005-2006 Strathmore’s Who’s Who of Professionals.
Mr. Dills has authored and published validation, regulatory and compliance-related articles, commentaries and technical guides, and is an accomplished global industry presenter. Mr. Dills’ academic degrees include Environmental Science and Biology. He is a former Chair and Co- Chair of ASQ’s Section 1506 and associated with the Biomedical Division, RAPS, AdvaMed, PDA, ISPE, and other industry working groups.
Email: firstname.lastname@example.org | Tel: +1-248-233-2049